von BK-Christian | 09.05.2024 | eingestellt unter: Science-Fiction

Kromlech: Neue Caste Enclaves Releases

Kromlech verstärken das Höhere Wohl.

KL CASTE ENCLAVES AUN CELESTIAL HOLOGRAM 1 KL CASTE ENCLAVES AUN CELESTIAL HOLOGRAM 2 KL CASTE ENCLAVES AUN CELESTIAL HOLOGRAM 3 KL CASTE ENCLAVES AUN CELESTIAL HOLOGRAM 4

CASTE ENCLAVES AUN CELESTIAL HOLOGRAM – 19.99 €

This set contains one Caste Enclaves Aun Celestial Hologram.

Sometimes, the Greater Cause requires a watchful eye. In such cases, Aun Celestials – whose existence is too precious to risk it on the battlefield – use hologram technology to ensure that their will be done. These spiritual leaders of Caste Enclaves spread their message across the whole galaxy, inspiring the troops among the stars.

The product design fits 28 mm scale wargames. This set is supplied unpainted and requires assembly. Cast from the highest quality resin. Our products are intended for experienced modelers and may require trimming, bending, and fitting. We recommend washing all resin parts before assembly (tap water with mild detergent) and using Kromlech Superglue or other cyanoacrylate adhesives. For more details, check the guide to handling resin in the Attachments tab.

This kit comes with a 40 mm round base with an acrylic flying stand.

KL CASTE ENCLAVES CALDERA WAR DRONE 1 KL CASTE ENCLAVES CALDERA WAR DRONE 2 KL CASTE ENCLAVES CALDERA WAR DRONE 3 KL CASTE ENCLAVES CALDERA WAR DRONE 4 KL CASTE ENCLAVES CALDERA WAR DRONE 5

CASTE ENCLAVES CALDERA WAR DRONE – 69.99 €

This set contains one Caste Enclaves Caldera War Drone armed with either a Particle Destroyer or a Heavy Magma Gun. Additional weaponry includes Plasma Guns, Gatlings, and Flamethrowers. Two Stealth Drones and three optional head designs included.

Caldera War Drones are sent onto the battlefield as the units with significant tasks. They’re imposing, weapon-packed mechs, armed with Particle Destroyers and Heavy Magma Guns, with the addition of Plasma Guns, Gatlings, and Flamethrowers. However, their main power lies in their highly advanced camouflage systems. With the assistance of Stealth Drones, Caldera War Drones can shift the tide of the battle with a single, unexpected strike.

The product design fits 28 mm scale wargames. This set is supplied unpainted and requires assembly. Cast from the highest quality resin. Our products are intended for experienced modelers and may require trimming, bending, and fitting. We recommend washing all resin parts before assembly (tap water with mild detergent) and using Kromlech Superglue or other cyanoacrylate adhesives. For more details, check the guide to handling resin in the Attachments tab.

Approximate dimensions: Width: 2.8″ / 7 cm, Height: 4.3″ / 11 cm

This kit comes with a 105×70 mm oval base, and 2x 32 mm round bases with acrylic flying stands.

KL CASTE ENCLAVES WAR DRONE COMMANDER 1 KL CASTE ENCLAVES WAR DRONE COMMANDER 2 KL CASTE ENCLAVES WAR DRONE COMMANDER 3 KL CASTE ENCLAVES WAR DRONE COMMANDER 4 KL CASTE ENCLAVES WAR DRONE COMMANDER 5

CASTE ENCLAVES WAR DRONE COMMANDER – 49.99 €

This set contains one Caste Enclaves War Drone Commander armed with either a one-handed or two-handed blade. Optional collection of range combat weaponry (as a primary weapon or the additional ones) and optional head designs included.

Legends say about a specific Caste Enclaves War Drone Commander. Some say that it can’t be a simple machine, that some rebellious spirit must possess it. Always leading from the front, that mysterious Commander wields a powerful blade. Being the master of the sudden death tactic, once this Commander carves the bloody path through the enemies with his weapon, the Caste Enclaves are usually at the doorstep of another decisive victory.

The product design fits 28 mm scale wargames. This set is supplied unpainted and requires assembly. Cast from the highest quality resin. Our products are intended for experienced modelers and may require trimming, bending, and fitting. We recommend washing all resin parts before assembly (tap water with mild detergent) and using Kromlech Superglue or other cyanoacrylate adhesives. For more details, check the guide to handling resin in the Attachments tab.

Approximate dimensions: Width: 1.8″ / 4.5 cm, Height: 3″ / 7.5 cm

This kit comes with a 60 mm round base.

KL CASTE ENCLAVES WAR DRONES SUNSTRIKE 1 KL CASTE ENCLAVES WAR DRONES SUNSTRIKE 2 KL CASTE ENCLAVES WAR DRONES SUNSTRIKE 3 KL CASTE ENCLAVES WAR DRONES SUNSTRIKE 4

CASTE ENCLAVES WAR DRONES – SUNSTRIKE – 49.99 €

This set contains one Caste Enclaves War Drones – Sunstrike team consisting of two Drones armed with Magma Guns (as a primary weapon or the additional ones). Optional head designs included.

Magma Guns are the primary weapons of Caste Enclaves War Drones from the Sunstrike formation. Concentrated firepower from these guns is capable of melting down heavy targets of hostile forces.

Combining speed, toughness, and firepower, War Drones are one of the most vital units in the Caste Enclaves armies. These multi-task machines armed with various weaponry can be depicted as a peak of the art of war. Of course, enemies obliterated by War Drones – like small stones covered by a tidal wave – usually don’t have time to acknowledge it.

The product design fits 28 mm scale wargames. This set is supplied unpainted and requires assembly. Cast from the highest quality resin. Our products are intended for experienced modelers and may require trimming, bending, and fitting. We recommend washing all resin parts before assembly (tap water with mild detergent) and using Kromlech Superglue or other cyanoacrylate adhesives. For more details, check the guide to handling resin in the Attachments tab.

Approximate dimensions: Width: 1.8″ / 4.5 cm, Height: 3″ / 7.5 cm

This kit comes with 2x 50 mm round bases.

KL CASTE ENCLAVES MAAR WAR DRONE 1 KL CASTE ENCLAVES MAAR WAR DRONE 2 KL CASTE ENCLAVES MAAR WAR DRONE 3 KL CASTE ENCLAVES MAAR WAR DRONE 4 KL CASTE ENCLAVES MAAR WAR DRONE 5 KL CASTE ENCLAVES MAAR WAR DRONE 6

CASTE ENCLAVES MAAR WAR DRONE – 89.99 €

This set contains one Caste Enclaves Maar War Drone armed with either a Heavy Gatling Gun or a Particle Cannon. Additional weaponry includes Plasma Guns, Missiles, and Magma Guns. Two Missile Drones and two optional head designs included.

Despite their enormous size, Maar War Drones have an incredibly vast movability. It isn’t their greatest strength, of course. That strength lies in their destructive weaponry, which encompasses Heavy Gatling Guns and Particle Cannons, with the assistance of Plasma Guns, Missiles, and Magma Guns (not to mention the supporting Missile Drones). Maar War Drones tower among other units in Caste Enclaves‘ armies, being great centerpieces for almost any strike force.

The product design fits 28 mm scale wargames. This set is supplied unpainted and requires assembly. Cast from the highest quality resin. Our products are intended for experienced modelers and may require trimming, bending, and fitting. We recommend washing all resin parts before assembly (tap water with mild detergent) and using Kromlech Superglue or other cyanoacrylate adhesives. For more details, check the guide to handling resin in the Attachments tab.

Approximate dimensions: Width: 4.7″ / 12 cm, Height: 4.9″ / 12.5 cm

This kit comes with a 120×92 mm oval base, and 2x 32 mm round bases with acrylic flying stands.

KL CASTE ENCLAVES BARRAGE WAR DRONE 1 KL CASTE ENCLAVES BARRAGE WAR DRONE 2 KL CASTE ENCLAVES BARRAGE WAR DRONE 3 KL CASTE ENCLAVES BARRAGE WAR DRONE 4 KL CASTE ENCLAVES BARRAGE WAR DRONE 5

CASTE ENCLAVES BARRAGE WAR DRONE – 49.99 €

This set contains one Caste Enclaves Barrage War Drone armed with either a Rail Gun or a Missile Launcher. Additional weaponry includes a Plasma Gun and a Great Missile.

Barrage War Drones were designed to provide long-range support on the battlefield. Their cafeteria of powerful weaponry – including either Rail Guns or Missile Launchers – was found extremely useful (not to say „necessary“) in taking down enemy tanks and fortified outposts. In addition, if that wasn’t enough, these Drones are equipped with Plasma Guns or Great Missiles.

The product design fits 28 mm scale wargames. This set is supplied unpainted and requires assembly. Cast from the highest quality resin. Our products are intended for experienced modelers and may require trimming, bending, and fitting. We recommend washing all resin parts before assembly (tap water with mild detergent) and using Kromlech Superglue or other cyanoacrylate adhesives. For more details, check the guide to handling resin in the Attachments tab.

Approximate dimensions: Width: 2.4″ / 6 cm, Height: 4.1″ / 10.5 cm

This kit comes with a 60 mm round base.

KL CASTE ENCLAVES WAR DRONES STARCRY 1 KL CASTE ENCLAVES WAR DRONES STARCRY 2 KL CASTE ENCLAVES WAR DRONES STARCRY 3 KL CASTE ENCLAVES WAR DRONES STARCRY 4

CASTE ENCLAVES WAR DRONES – STARCRY – 49.99 €

This set contains one Caste Enclaves War Drones – Starcry team consisting of two Drones armed with either Gatlings or Flamethrowers (as a primary weapon or the additional ones). Optional head designs included.

Prepared for the furious assault of the masses, Caste Enclaves War Drones of Starcry formation are packed with Gatlings and flamethrowers. Both these weapons prove themselves to be useful in handling hordes of enemy troops.

Combining speed, toughness, and firepower, War Drones are one of the most vital units in the Caste Enclaves armies. These multi-task machines armed with various weaponry can be depicted as a peak of the art of war. Of course, enemies obliterated by War Drones – like small stones covered by a tidal wave – usually don’t have time to acknowledge it.

The product design fits 28 mm scale wargames. This set is supplied unpainted and requires assembly. Cast from the highest quality resin. Our products are intended for experienced modelers and may require trimming, bending, and fitting. We recommend washing all resin parts before assembly (tap water with mild detergent) and using Kromlech Superglue or other cyanoacrylate adhesives. For more details, check the guide to handling resin in the Attachments tab.

Approximate dimensions: Width: 1.8″ / 4.5 cm, Height: 3″ / 7.5 cm

This kit comes with 2x 50 mm round bases.

KL CASTE ENCLAVES WAR DRONES FIRESTORM 1 KL CASTE ENCLAVES WAR DRONES FIRESTORM 2 KL CASTE ENCLAVES WAR DRONES FIRESTORM 3 KL CASTE ENCLAVES WAR DRONES FIRESTORM 4

CASTE ENCLAVES WAR DRONES – FIRESTORM – 49.99 €

This set contains one Caste Enclaves War Drones – Firestorm team consisting of two Drones armed with either Missile Launchers or Plasma Guns (as a primary weapon or the additional ones). Optional head designs included.

Firestorm is a term used to describe a specific formation among Caste Enclaves War Drones. These Drones – armed with Missile Launchers and Plasma Guns – were designed to match the elite troops of the enemy forces.

Combining speed, toughness, and firepower, War Drones are one of the most vital units in the Caste Enclaves armies. These multi-task machines armed with various weaponry can be depicted as a peak of the art of war. Of course, enemies obliterated by War Drones – like small stones covered by a tidal wave – usually don’t have time to acknowledge it.

The product design fits 28 mm scale wargames. This set is supplied unpainted and requires assembly. Cast from the highest quality resin. Our products are intended for experienced modelers and may require trimming, bending, and fitting. We recommend washing all resin parts before assembly (tap water with mild detergent) and using Kromlech Superglue or other cyanoacrylate adhesives. For more details, check the guide to handling resin in the Attachments tab.

Approximate dimensions: Width: 1.8″ / 4.5 cm, Height: 3″ / 7.5 cm

This kit comes with 2x 50 mm round bases.

KL CASTE ENCLAVES WAR CADRE GUNNERS 1 KL CASTE ENCLAVES WAR CADRE GUNNERS 2 KL CASTE ENCLAVES WAR CADRE GUNNERS 3 KL CASTE ENCLAVES WAR CADRE GUNNERS 4

CASTE ENCLAVES WAR CADRE GUNNERS – 49.99 €

This set contains one Caste Enclaves War Cadre Gunners team consisting of ten miniatures: nine Gunners and one Sergeant with an optional close-combat weapon. Includes one Gunner wielding a plasma grenade.

When the Greater Cause calls, Caste Enclaves answers with their technologically advanced troops called Cadre Gunners. Programmed to be entirely faithful to the mission of their creators, these robotic soldiers shower down enemies with glowing salvoes from their guns, throwing a plasma grenade from time to time. The light but durable plates the Gunners are covered with make them perfect shock troops.

The product design fits 28 mm scale wargames. This set is supplied unpainted and requires assembly. Cast from the highest quality resin. Our products are intended for experienced modelers and may require trimming, bending, and fitting. We recommend washing all resin parts before assembly (tap water with mild detergent) and using Kromlech Superglue or other cyanoacrylate adhesives. For more details, check the guide to handling resin in the Attachments tab.

This kit comes with 10x 25 mm round bases.

Quelle: Kromlech

BK-Christian

Chefredakteur und Betreiber von Brückenkopf-Online. Seit 2002 im Hobby, erstes Tabletop Warhammer Fantasy (Dunkelelfen). Aktuelle Projekte: Primaris Space Marines, Summoners (alle Fraktionen), Deathmatch, Deadzone/Warpath (Asterianer und Enforcer), diverse Raumschiffe und allerlei Mechs.

Ähnliche Artikel
  • Crowdfunding
  • Science-Fiction

Alexei Vella: Expendable Employees Kickstarter

28.05.20242
  • Necromunda

Necromunda: Trazior Sentry Guns Preview

28.05.20245
  • Historisch
  • Science-Fiction

Khurasan Miniatures: Neuheiten und Preview

28.05.2024

Kommentare

  • Das Holgramm ist super, ich würde es mit als STL file zum drucken wünschen, damit ich es mit aus transparentem Resin druck kann. aber vieleicht muss ich da selber kreativ werden und mir die Idee klauen.

    Zu den Battle Suits, irgendwie find ich die Preise echt gesalzen und auf GW Niveau.

  • Mir ist das Design zu grob. Sieht eher nach Mechanicus aus anstatt das rel elegante Design der Tau’s….vlt liegt das auch an der knalligen Bemalung die das noch mehr herausarbeitet.
    Und ja, die Preise sind sportlich, aber da GW bereits ne Preiserhöhung angesetzt hat, bleiben die Figuren immer noch die preiswertere Alternative

    • Ich musste erstmal schlucken, als ich realisiert habe, dass diese Preise in der Tat noch die günstigere Alternative sind…

Schreibe einen Kommentar

Deine E-Mail-Adresse wird nicht veröffentlicht. Erforderliche Felder sind mit * markiert

I accept that my given data and my IP address is sent to a server in the USA only for the purpose of spam prevention through the Akismet program.More information on Akismet and GDPR.