von BK-Bob | 23.01.2022 | eingestellt unter: Kickstarter, Science-Fiction

Red Dog Minis: Titanhammer Railgun Turret Kickstarter

Wer alternative Bewaffnung für seine Modelle der fernen Zukunft sucht könnte mit dem neuen Kickstarter von Red Dog Minis fündig werden.

Titanhammer Railgun Turret

Titanhammer Railgun Turret 1

A resin tank turret option for converting 28mm sci-fi wargaming models

The Titanhammer Railgun Project:

The goal of this project is to secure funding that enables us to get a set of resin weapon and tank parts produced. The funding will be used for molding, casting materials, production and shipping of the rewards. The designs are fully finished and are ready to be molded and cast once the project is funded. (Pictures of the finial resin products will be posted in the update section)

Please pledge the full amount for your order upfront, I will not be using pledge manager after the campaign. Please make sure that you pledge amount covers all of the items you wish to receive. Once the campaign is finished you will receive a survey via kickstarter that will ask to confirm which items you want.

There are eight types of items available:

  •  Titanhammer Railgun Turret
  •  Twin Railgun Turret
  • Twin Autocannon Turret
  •  Heavy Missile Sponson (pair)
  •  Light Missile Sponson (pair)
  •  Cannon Sponson (pair)
  •  Chin Mounted Cannon (single)
  •  Chin Mounted Sensor Pod (single)

 

Titanhammer Railgun Turret 2

Titanhammer Railgun

Titanhammer Railgun Turret 3

Twin Railgun Turret

Titanhammer Railgun Turret 4

Twin Autocannon Turret

Titanhammer Railgun Turret 5

Heavy Missile Sponson (pair of 2)

Titanhammer Railgun Turret 6

Light Missile Sponson (pair of 2)

Titanhammer Railgun Turret 7

Cannon Sponson (pair of 2)

Titanhammer Railgun Turret 8

Chin Mounted Cannon

Titanhammer Railgun Turret 9

Chin Mounted Sensor

All parts will be made from a high quality resin.

The Titanhammer turret mount measures approximately 45mm long and 37mm wide at the widest point. The railgun part measures 140mm long and the barrel is approximately 18mm wide.

Each Titanhammer Turret is comprised of 3 resin pieces: 1 turret mount & 2 weapon pieces, it also includes 2 magnets. Each weapon is on a joint that can be mounted pointed straight forward or with an upward tilt range of 15 degrees.

The Twin Railgun turret mount measures approximately 63mm long and 58mm wide at the widest point. The railgun part measures 87mm long and the barrel is approximately 10mm in height. Please note the Twin Railguns are significantly smaller than the Titanhammer version. (think of them as a pair of light railguns VS the single heavy)

Each Twin Railgun Turret is comprised of 3 resin pieces: 1 turret mount & 2 weapon pieces, it also includes 2 magnets. Each weapon is on a joint that can be mounted pointed straight forward or with an upward tilt.

The sponson mounting discs measures 21mm in dia. and the missile launchers are approximately 23mm long. The light missile sponson both come with pre-set holes for magnets allowing it to tilt up or down. The heavy missile sponson is in a fixed position and does not tilt.

The sponsons are comprised of multiple parts.

Each Light Missile Sponson is a total of 8 pieces: 1 disc,  2 supporting arms, 1 missile launcher box and 4 magnets.

Each Heavy Missile Sponson is a total of 2 pieces: 1 disc, 1 missile launcher box.

Each Canon Sponson is a total of 8 pieces: 1 disc, 2 supporting arms, 1 cannon and 4 magnets.

Some minor clean up and assembly will be required with the parts. These are not toys and should not be allowed around small children under the age of 13. There are small parts that could be harmful or be a choking hazard if swallowed.

In order to assemble the model you will need to use super glue also known as CA glue. We suggest Krazy Glue, Zap Cap or Gorilla Glue brands since they are widely available. (Regular model glue intended for plastics like Testors will not work on resin) These parts are intended for experienced modelers.

Please pay careful attention to the polarity facings of the magnets before gluing them in place. Make sure to test the alignment so that they pull together rather than repel, if they are misaligned; the parts for your turret will not seat or hold in place correctly.

Add-Ons:

You may add any number of additional Titahammer Railgun Turrets,  Twin Railgun Turrets, or Twin Autocannon Turrets onto your pledge for $20 each.

You may add any number of Cannon Sponsons, Light or Heavy Missile Sponsons sets onto your pledge for $10 each.

You may add any number of Chin Mounted Cannons or Chin Mounted Sensor Pods onto your pledge for $5 each.

(The initial pledge includes 1 Titanhammer Turret and the shipping.  you may substitute a Twin Railgun Turret or Add-On items in place of the Titanhammer Turret if you wish, equaling $20 in value. The survey will have a special request option).

Die Kampagne ist bereits schon finanziert und läuft noch 8 Tage.

Quelle: Titanhammer Railgun Turret

BK-Bob

Seit 2010 im Hobby. Aktuelle Projekte: Herr der Ringe (Harad, Khand und Ostlinge), Saga Ära der Magie (Die Untoten Legionen), WarmaHordes (Crucible Guard, Söldner und Circle), Summoners (Erde), Konflikt 47 (Briten)

Ähnliche Artikel
  • Kickstarter
  • Science-Fiction

Halflings in Space!: Kickstarter läuft

04.07.20223
  • Historisch
  • Kickstarter

Microworld Games: Neuer Kickstarter

30.06.2022
  • Kickstarter
  • Science-Fiction

Heresy Miniatures: 28mm Sci Fi Kickstarter

28.06.20224

Kommentare