von BK-Christian | 20.01.2021 | eingestellt unter: 3D-Druck, Kickstarter

Union Asunder: 3D-Druck 15mm ACW

15mm Miniaturen zum Amerikanischen Bürgerkrieg warten bei Kickstarter auf fleißige Selberdrucker.

A comprehensive range of 15mm & 28mm 3D-printable miniatures for modelling both Union and Confederate armies for the American Civil War

Two armies‘ STLs allowing for the printing of armies covering the full scope of the American Civil War in both 15mm and 28mm, based either individually or on strips.

The third pledge tier also includes the original Blender file, allowing for the posing and exporting of your own custom miniatures from the wide array of parts on offer.

If you want to get in touch with any questions/comments, please do check out our Facebook group!

HT Union Asunder 3D Printable American Civil War Armies 1 HT Union Asunder 3D Printable American Civil War Armies 2

Turner Miniatures‘ Union Asunder offers 15mm armies like you’ve never seen before, offering an unprecedented level of customisation through an ambitious system of modular miniatures: Every soldier can be tweaked with a wide array of options and will scale as low as 10mm or even up to 28mm!

HT Union Asunder 3D Printable American Civil War Armies 3

Union Asunder has a basic entry cost of just £35 with which you’ll not only get all the constituent units necessary for building both a Union and Confederate army, but also all the stretch goals! This core set consists of STL files of infantry, cavalry and artillery, all pre-supported and ready for printing.

HT Union Asunder 3D Printable American Civil War Armies 4

In addition, the 28mm reward tier offers the miniatures as sliced into pre-supported multi-part pieces scaled for 28mm wargaming.

The final tier includes an original Blender file, allowing you to pick and choose from the large array of custom parts on offer to export your own custom figures, applied to various relevant poses.

HT Union Asunder 3D Printable American Civil War Armies 5

Instructions, both written and in video, will be included with the Blender file tier, detailing how to go about exporting, posing and „touching up“ the miniatures.

Please note that this is a digital product offering STL models and a Blender file, there are no reward tiers that offer physical models.

HT Union Asunder 3D Printable American Civil War Armies 6

30lb Parrott Gun

HT Union Asunder 3D Printable American Civil War Armies 7

While the idea of this set is to export your own customised miniatures, a core of premade figures will come pre-supported for immediate easy printing!

The Blender files are structured in such a way that the user can select which of the items, listed on the overview to the right, they want to export the model with. It’s simply a case of deleting the items you don’t want and leaving those you want on the model.

HT Union Asunder 3D Printable American Civil War Armies 8

I will be producing tutorials, both written and on YouTube, covering this process in detail; allowing backers who choose to purchase the Blender files to be able to export their own custom miniatures, with their choice of equipment, headgear, facial hair and hair styles.

HT Union Asunder 3D Printable American Civil War Armies 9

The core £40 set, without any stretch goals added, includes Union infantry in sack coats and forage caps, as well as Confederates in shell jackets and kepis, with the following poses, allowing for both marching regiments and detailed firing lines:

  • Three marching poses
  • Firing
  • Reaching for a cartridge
  • Biting a cartridge
  • Pouring powder
  • Using a ramrod
  • Cocking rifle
  • Reaching for a percussion cap
  • Placing percussion cap
  • Shouldered arms

HT Union Asunder 3D Printable American Civil War Armies 10

13mm-scaled Confederate infantry mounted on strip bases – printing the models „by rank“ allows for whole armies to be printed rapidly

The core range of infantry is almost complete, merely needing exporting and test printing.

Work on the artillery has begun, with a Parrott rifle awaiting a test print and artillery crews, with authentic poses, currently being sculpted

HT Union Asunder 3D Printable American Civil War Armies 11

Various prototype poses for the sabre-armed cavalry

Die Kampagne läuft noch 4 Tage und ist finanziert.

Quelle: Union Asunder: 3D-Printable American Civil War Armies

BK-Christian

Chefredakteur und Betreiber von Brückenkopf-Online. Seit 2002 im Hobby, erstes Tabletop Warhammer Fantasy (Dunkelelfen). Aktuelle Projekte: Primaris Space Marines, Summoners (alle Fraktionen), Deathmatch, Deadzone/Warpath (Asterianer und Enforcer), diverse Raumschiffe und allerlei Mechs.

Ähnliche Artikel
  • 3D-Druck
  • Historisch

Wargames Atlantic Digital: Armored Samurai

18.03.202410
  • 3D-Druck
  • Patreon

OnePageRules: März News und Vorschau #2

16.03.2024
  • 3D-Druck
  • Science-Fiction

Puppetswar: Neue Veröffentlichungen

14.03.20242

Kommentare

  • Also die Idee dahinter ist echt nicht schlecht. Für so ein Massensystem in 15 mm hat man seine Minis verdammt schnell gedruckt.

    Allerdings denke ich doch, dass selbst aktuelle Spitzenmodelle wie der Anycybic Photon Mono X oder der Elegoo Staurn noch ein paar Probleme bei den Details von so kleinen Minis haben könnten.

    Will sagen: Bei der Größe der Minis wird man die Pixel, aus denen die gedrucken Minis dann ja aufgebaut sind, noch recht deutlich sehen können. Das erkennt man ja bspw. bei dem hier gezeigten Kavallereisten recht gut. Hier bräuchte es nochmal einen Sprung in der Auflösung von 3D Druckern, um richtig gut auszusehen.

    • Also ehrlich gesagt darfst Du den Reiter da oben nicht als Benchmark für die Leistungsfähigkeit der aktuellen Druckergeneration sehen. Ich habe einen Saturn in Benutzung aktuell. Seine Auflösung ist die gleiche wie die des alten Photon, nur halt auf größerer Fläche. Die kleinen neuen 4K Modelle zB. von Phrozen kommen in der x/y Auflösung nochmal deutlich runter. Aber das ist bei den Geräten nicht primär DAS Problem was optisch wirklich mit dem Auge zu sehen ist. Die Stellschraube heisst Schichthöhe und sauber kalibrierte Belichtungszeit. Und da muss man einfach bei kleinerem Maßstab auch kleine Schichthöhen wählen, damit man es nicht so vergurkt wie bei dem Reiter da oben.
      Der Saturn zB kommt bis auf 10micron Schichtdicke runter. Aber selbst 20 microns sollten reichen um da sehr gute Ergebnisse zu erzeugen bei diesen Minis da oben.

    • Ich drucke 1:600 Minis mit einem SLA-Drucker – kein Problem bei 0,01mm mit den Abstufungen.

      Die 3D-Drucker haben einen ziemlichen Quantensprung gemacht, auch vom Preis her.
      Bei den SLA-Resindruckern bist du mittlerweile ab 200€ dabei.

  • Ich kenne mich mit der Leistungsfähigkeit solcher Drucker nicht aus, aber eines kann ich sagen: Die Figuren finde ich richtig schlecht! Kaum Faltenwurf bei der Kleidung, schlechte Details, grauenhafte Haltungen der Figuren! Für mich wäre das so definitiv nichts…

Die Kommentarfunktion ist geschlossen.