von BK-Thorsten | 05.07.2021 | eingestellt unter: Terrain / Gelände

TTCombat: Neuheiten

TTCombat haben einige neue Gebäude für Dropzone Commander im Shop.

TTCombat Alenko 01 TTCombat Alenko 02 TTCombat Alenko 03 TTCombat Alenko 04 TTCombat Alenko 05

Compound Alenko – 10,00 GBP

This compound was once a well kept, prosperous facility. Now largely forgotten the reconquest has taken interest in reclaiming its lost secrets.

A Compound Alenko makes for a great addition to any 10mm scale board. Its interconnected structures can give cover to troops, or leave the tiniest sliver of sight through for a lucky pot-shot.

This kit is made from 3mm MDF. It is a great piece of scenery to use on the tabletop for Dropzone Commander and will work perfectly with other 10mm games.

Kit supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

WIDTH DEPTH HEIGHT
Dimensions 22cm 19cm 10cm

TTCombat Benezia 01 TTCombat Benezia 02 TTCombat Benezia 03 TTCombat Benezia 04 TTCombat Benezia 05

Compound Benezia – 10,00 GBP

There’s something in those silos, lieutenant we just need to break in to find it! Why else would they have a processing plant attached to them?

A Compound Benezia is a great way to help fill out a board of 10mm industrial terrain. It’s two connected sections provide line of sight blocking for both ground and air based units. The gantries between both splits the garrison into two and provides space underneath to hide units from either side. Or to just drive your tanks through.

This kit is made from 3mm MDF. It is a great piece of scenery to use on the tabletop for Dropzone Commander and will work perfectly with other 10mm games.

Kit supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

WIDTH DEPTH HEIGHT
Dimensions 13cm 30cm 12cm

TTCombat Chakwas 01 TTCombat Chakwas 02 TTCombat Chakwas 03 TTCombat Chakwas 04 TTCombat Chakwas 05

Compound Chakwas – 12,00 GBP

Sir, I don’t think those silos are full of water, jellies would have taken it all by now. Looks pretty hazardous if you ask me.

A Compound Chakwas is an imposing structure, at least as far as 10mm scale goes. This structure makes for a great solid centrepiece for your board. Unmistakably industrial and build to contain some pretty dangerous compounds, your units -should- be safe from enemy fire behind it.

This kit is made from 3mm MDF. It is a great piece of scenery to use on the tabletop for Dropzone Commander and will work perfectly with other 10mm games.

Kit supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

WIDTH DEPTH HEIGHT
Dimensions 22cm 24cm 12cm

TTCombat Drack 01 TTCombat Drack 02 TTCombat Drack 03 TTCombat Drack 04 TTCombat Drack 05

Compound Drack – 12,00 GBP

A common site early on in the settlement process, these old FOB’s often get repurposed for industrial control and storage.

A single Compound Drack contains enough buildings to comfortably house a small security detachment early in a settlements development. On the tabletop a Compound Drack gives you 4 buildings to move around and make some great looking boards with.

This kit is made from 3mm MDF. It is a great piece of scenery to use on the tabletop for Dropzone Commander and will work perfectly with other 10mm games.

Kit supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

WIDTH DEPTH HEIGHT
Barracks 10cm 12cm 5cm
Command Centre 25cm 19cm

TTCombat Eve 01 TTCombat Eve 02 TTCombat Eve 03 TTCombat Eve 04 TTCombat Eve 05 TTCombat Eve 06 TTCombat Eve 07

Compound Eve – 12,00 GBP

What kind of manufacturing plant needs a high security watchtower? What did they even make here?

If you need a large and imposing industrial building for your 10mm scaled games, then the Compound Eve has exactly what you need. It’s large footprint makes it a great focal point and objective building, and lots of roof space is always a plus. This kit also includes a watchtower, to keep an eye on the surroundings and make sure no one unauthorized gets to access the factory proper.

This kit is made from 3mm MDF. It is a great piece of scenery to use on the tabletop for Dropzone Commander and will work perfectly with other 10mm games.

Kit supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

WIDTH DEPTH HEIGHT
Factory 22cm 27cm 10cm
Watchtower 55cm 55cm 10cm

Quelle: TTCombat

BK-Thorsten

Brückenkopf-Online Redakteur und Tabletop Insider stv. Chefredakteur. Spielt Infinity, SAGA, Freebooter's Fate, Kings of War, Warhammer 40k, Warzone Resurrection, Dropzone Commander, Deadzone, Dreadball, X-Wing, Konflikt '47, Bolt Action, Dead Man's Hand, Dracula's America, Beyond the Gates of Antares, Dropfleet Commander, Frostgrave, Collision, Bushido, Shadespire, Aristeia! und Warpath.

Ähnliche Artikel
  • 3D-Druck
  • Terrain / Gelände

3D Alien Worlds: Pagoden Preview

28.07.2021
  • Carnevale
  • Terrain / Gelände

TTCombat: Carnevale und Gelände Preview

28.07.20213
  • Terrain / Gelände

Wild Land Store: Neues Gelände

28.07.2021

Kommentare

Schreibe einen Kommentar

Deine E-Mail-Adresse wird nicht veröffentlicht. Erforderliche Felder sind mit * markiert.

I accept that my given data and my IP address is sent to a server in the USA only for the purpose of spam prevention through the Akismet program.More information on Akismet and GDPR.