von BK-Bob | 01.12.2021 | eingestellt unter: Fantasy, Science-Fiction

Creature Caster: The Hunter & Engines of Annihilation

Bei Creature Caster können neue Figuren vorbestellt werden.

Creature Caster The Hunter 1 Creature Caster The Hunter 2 Creature Caster The Hunter 3 Creature Caster The Hunter 4 Creature Caster The Hunter 5 Creature Caster The Hunter 6 Creature Caster The Hunter 7

The Hunter – 39,60€

The Hunter’s skills are honed to a razor edge. As High Chaplain of The Order, he will stop at nothing to reach his prey.

The Hunter is cast in robust, durable, and reusable SiOres. He comes with a custom 40mm round base and an alternate custom 50mm diorama base.

The Hunter – High Chaplain of the Order
ALL Novac Dawn model preorders will come with an EXCLUSIVE ART CARD!
This is a PREORDER model. Preorders will ship in the first quarter of 2022. Please note that if there is a preorder model in your order, ALL OTHER MODELS in your order will also ship in Quarter 1.

Height: 32mm-scale
Bases: 40mm and 50mm, round
Material: SiOres

Creature Caster The Retinue 1 Creature Caster The Retinue 2 Creature Caster The Retinue 3 Creature Caster The Retinue 4 Creature Caster The Retinue 5 Creature Caster The Retinue 6

The Retinue – 49,20€

Fierce warriors and huntsmen, the Retinue’s loyalty to The Order and their master ends only in death.

The Retinue are cast in robust, durable, and reusable SiOres. They come with custom 32mm round bases.

The Retinue – Loyal Followers of the Order
ALL Novac Dawn model preorders will come with an EXCLUSIVE ART CARD!
This is a PREORDER model. Preorders will ship in the first quarter of 2022. Please note that if there is a preorder model in your order, ALL OTHER MODELS in your order will also ship in Quarter 1.

Height: 32mm-scale
Bases: 32mm, round
Material: SiOres

Creature Caster The Hunter And Retinue Set

The Hunter and Retinue Set – 78,00€

No prey can escape them, be it man or beast, but under the Hunter’s Moon only fate will decide who is the hunter and who is the hunted.

The Hunter and Retinue are cast in robust, durable, and reusable SiOres. The Hunter comes with a custom 40mm round base and an alternate custom 50mm diorama base. The Retinue come with custom 32mm round bases.

The High Chaplain of The Order and his Loyal Followers
ALL Novac Dawn model preorders will come with an EXCLUSIVE ART CARD!
This is a PREORDER model. Preorders will ship in the first quarter of 2022. Please note that if there is a preorder model in your order, ALL OTHER MODELS in your order will also ship in Quarter 1.

Height: 32mm-scale
The Hunter Bases: 40mm and 50mm, round
The Retinue Bases: 32mm, round
Material: SiOres

Creature CasterUntamed Fairy Tales – Red Riding Hood

Untamed Fairy Tales – Red Riding Hood PREORDER Bundle – 117,00€

This Novac Dawn Black Friday Bundle brings you all of the models in their Untamed Fairy Tales: Red Riding Hood Series, so far!
• The Wolf and the Pack
• The Hunter and Retinue

Novac Dawn has twisted the dark fairy tale into a nightmare with even more depth. Keep your eyes and ears open for more dark renditions of characters from this traditional tale.

he Wolf, The Pack, The Hunter, and The Retinue in one kit! Save 25%!
ALL Novac Dawn model preorders will come with an EXCLUSIVE ART CARD!
This is a PREORDER model. Preorders will ship in the first quarter of 2022. Please note that if there is a preorder model in your order, ALL OTHER MODELS in your order will also ship in Quarter 1.

Material: SiOres

Creature Caster Corpse Bearer 1 Creature Caster Corpse Bearer 2 Creature Caster Corpse Bearer 3 Creature Caster Corpse Bearer 4 Creature Caster Corpse Bearer 5 Creature Caster Corpse Bearer 6 Creature Caster Corpse Bearer 7 Creature Caster Corpse Bearer 8 Creature Caster Corpse Bearer 9 Creature Caster Corpse Bearer 10 Creature Caster Corpse Bearer 11 Creature Caster Corpse Bearer 12 Creature Caster Corpse Bearer 13 Creature Caster Corpse Bearer 14 Creature Caster Corpse Bearer 15 Creature Caster Corpse Bearer 16 Creature Caster Corpse Bearer 17

Corpse-Bearer – 84,00€

Bringing Death, Wearing Death

The Corpse-Bearer is an Engine of Annihilation variant that mounts the bodies of its foes on its massive pauldrons, striking terror in even the fiercest enemy. Their sleek frames are designed to compact their silhouette, making them a harder target to hit on the battlefield. Striking from afar, their energy weapons and cascading explosive rounds leave devastating gaps in enemy lines.

The Corpse-Bearer is hand-cast in pure, unfilled resin. It comes with a custom 100mm round base and has a height of 140mm from the bottom of its base to the tip of its pauldron spikes. Its chassis is also interchangeable with the Gorebrand variant’s chassis. Model is unassembled and unpainted. Intended for ages 14+.

Each PREORDER Engine of Annihilation comes with an exclusive wound-tracker dial! (Only during the preorder.)
This is a PREORDER model. Preorders will ship in the first quarter of 2022. Please note that if there is a preorder model in your order, ALL OTHER MODELS in your order will also ship in Quarter 1.

Height: 140mm
Base: 100mm, round
Material: pure, unfilled resin

Creature Caster Gorebrand 1 Creature Caster Gorebrand 2 Creature Caster Gorebrand 3 Creature Caster Gorebrand 4 Creature Caster Gorebrand 6 Creature Caster Gorebrand 7 Creature Caster Gorebrand 8 Creature Caster Gorebrand 9 Creature Caster Gorebrand 10 Creature Caster Gorebrand 11

Gorebrand – 84,00€

Close-Combat Mechanical Mayhem

The Gorebrand variant Engine of Annihilation celebrates the glory of battle by engaging directly with the enemy. While its Corpse-Bearer counterpart delivers suppressive fire from the rear, the Gorebrand uses its massive girth and heavy blades to eviscerate its foes. Its deadly blows grind mortal flesh to pulp and pulverize even the sturdiest bones. Armed with razor sharp pauldrons and spiked armour, it crashes into the melee revelling in the mayhem of its design.

The Gorebrand is hand-cast in pure, unfilled resin. It comes with a custom 100mm round base and has a height of ~140mm from the bottom of its base to the tip of its pauldron spikes. Its chassis is also interchangeable with the Corpse-Bearer variant’s chassis. Model is unassembled and unpainted. Intended for ages 14+.

Each PREORDER Engine of Annihilation comes with an exclusive wound-tracker dial! (Only during the preorder.)
This is a PREORDER model. Preorders will ship in the first quarter of 2022. Please note that if there is a preorder model in your order, ALL OTHER MODELS in your order will also ship in Quarter 1.

Height: ~140mm
Base: 100mm, round
Material: pure, unfilled resin

Creature Caster Engines Of Annihilation Set

Engines of Annihilation Set – 129,60€

Introducing the First Demons of Tyranny

There are many different forms in which a demonic incursion may manifest, but none so frightening as those led by the forces of Tyranny. Mechanical demon-engines wreak havoc on the battlefield, rending and crushing those that oppose their battered frames of demon-wrought steel. Leading the vanguard are the Engines of Annihilation, massive constructs piloted by demons whose flesh has been sacrificially fused with their hellish chassis.

The Corpse-Bearer and Gorebrand are hand-cast in pure, unfilled resin. They come with custom 100mm round bases and have heights of ~140mm from the bottom of their bases to the tip of their pauldron spikes. Their chassis are interchangeable. Model is unassembled and unpainted. Intended for ages 14+.

Each PREORDER Engine of Annihilation comes with an exclusive wound-tracker dial! (Only during the preorder.)
These are PREORDER models. Preorders will ship in the first quarter of 2022. Please note that if there is a preorder model in your order, ALL OTHER MODELS in your order will also ship in Quarter 1.

Heights: ~140mm
Bases: 100mm, round
Material: pure, unfilled resin

Quelle: Creature Caster

BK-Bob

Seit 2010 im Hobby. Aktuelle Projekte: Herr der Ringe (Harad, Khand und Ostlinge), Saga Ära der Magie (Die Untoten Legionen), WarmaHordes (Crucible Guard, Söldner und Circle), Summoners (Erde), Konflikt 47 (Briten)

Ähnliche Artikel
  • Fantasy

Khurasan Miniatures: Fantasy Neuheit

29.05.2022
  • Fantasy

Black Scorpion: Weitere Preview

29.05.2022
  • Fantasy

Mkontraros: The Fallen

28.05.2022

Kommentare

  • Meiner Meinung nach typischer Fall von tollem 3D sculpt – der beim Bemalen aber absolut keinen Spaß macht, weil völlig mit Details überladen und die meisten Texturen schon vorgegeben sind.

  • Ich frag mich, ob selbst sehr gute Resindrucker (Formlabs und co)einen solche Details realisieren können… Ich kanns mir einfach nicht vorstellen.

  • Die verkaufen doch keine Files sondern Minis, ne?

    Kriegt man die auch direkt hierzulande oder geht das nur über deren UK-Shop für EU?
    Will einfach keinen Heckmeck wg Einfuhr etc. Sind auch so schon eher teuer für meinen Geschmack, hätte aber gern was von denen… :/

    • Die werden aus NL geleidert und somit kein Problem. Ich habe noch nie was dazu zahlen müssen!
      Und die Resinsachen sind einfach genial!!

      • Danke, das wäre ja nett!
        Leider ist die Seite recht intransparent bzw. inkonsistent diesbezüglich:
        Unter Community findet man endlich mal „Kleingedrucktes“ und dort unter FAQ steht, für EU käme es aus UK.
        Beim Checkout zur Probe steht bei Shipping was von Rumänien.
        Es gibt aber auch irgendwie nirgends eine Standort- & Adressangabe. Bei sowas stellen sich mir sämtliche Nackenhaare auf…

Die Kommentarfunktion ist geschlossen.