von BK-Herr Kemper | 04.07.2020 | eingestellt unter: 3D-Druck, Terrain / Gelände

Corvus Games Terrain: Neuheiten

Es gibt Neuheiten von Corvus Games Terrain.

Corvus Games Terrain  Urban Post Office Corvus Games Terrain  Urban Post Office2

 

Urban Post Office Digital STL 3D printable – 4,00 EUR

This 3D printable Post Office building is scaled for 28mm and fits neatly with the Comic Book Store, the Sandwich Shop and the Convenience Store.
Prints as three main pieces, with an optional sign included. The upper floor is stackable allowing you to create a tall structure or just pop the roof on the lower floor and build it as single-storey shop.

Ideal for urban based games like Fallout, The Walking Dead, Last Days: Zombie Apocalypse, and This Is Not A Test.

Compatible with Marvel Crisis Protocol. Just scale to 126% in your slicing software. Ideal as Size 3 terrain.

Rendered miniature model shown for scale is 28mm to the eyes.

Dimensions:

Lower – 99mm x 89mm x 59mm
Upper – 95mm x 88mm x 57mm
Roof – 95mm x 95mm x 17mm

CorvusGamesTerrain3Dprintable15mmscifioutpostcompoundbuildings X1400 CorvusGamesTerrain3Dprintable15mmscifioutpostcompoundbuildingLandingPad X1400 CorvusGamesTerrain3Dprintable15mmscifioutpostcompoundbuildingType6 X1400 CorvusGamesTerrain3Dprintable15mmscifioutpostcompoundbuildingType4 X1400 CorvusGamesTerrain3Dprintable15mmscifioutpostcompoundbuildingType7 X1400 CorvusGamesTerrain3Dprintable15mmscifioutpostcompoundbuildingType5 X1400 CorvusGamesTerrain3Dprintable15mmscifioutpostcompoundbuildingType1 X1400 CorvusGamesTerrain3Dprintable15mmscifioutpostcompoundbuildingType2 X1400 CorvusGamesTerrain3Dprintable15mmscifioutpostcompoundbuildingType3 X1400 CorvusGamesTerrain3Dprintable15mmscifioutpostcompoundbuildingscatterterrain X1400

Protectorate Outpost Compound 15mm Digital STL 3D printable – 8,00 EUR

A 3D printable 15mm scale Protectorate Outpost Compound compatible with sci-fi tabletop wargames.
Seven different scifi military buildings with removable roofs, as well as a stand-alone landing pad. Extras such as scatter shipping containers, barrels, pallets, comms towers and cargo included.
Roof options come with an insert system allowing different attachments to be affixed enabling you to create different looking building combinations.
Compatible with the Protectorate Tracked Vehicles bundle of scifi 15mm tanks.

Dimensions:

Building A – 81mm x 51mm x 33mm
Building B – 53mm x 51mm x 33mm
Building C – 110mm x 51mm x 33mm
Building D – 116mm x 56mm x 33mm
Building E – 119mm x 100mm x 33mm
Building F – 106mm x 93mm x 33mm
Building G – 116mm x 97mm x 33mm
Landing Pad – 142mm x 129mm x 25mm

CorvusGamesTerrain3Dprintablefoodstand.scifi28mmtabletopwargamingterrainforMarvelCrisisProtocol Infinity StarWarsLegion Necromunda StarBreachandWarpath X1400 CorvusGamesTerrain3Dprintablefoodstand.scifi28mmtabletopwargamingterrainforMarvelCrisisProtocol Infinity StarWarsLegion Necromunda StarBreach Warpath X1400 CorvusGamesTerrain3Dprintablefoodstand.scifi28mmtabletopwargamingterrainforMarvelCrisisProtocol Infinity StarWarsLegion Necromunda StarBreach X1400

MidRim City Food Stand Digital STL 3D Printable – 4,50 EUR

This 3D printable MidRim Food Stand is ideal for sci-fi wargaming tables. Scaled for 28mm – 34mm games to be compatible with Star Wars Legion, Necromunda, Star Breach, Infinity, Warpath and Marvel Crisis Protocol.

Ideal for creating an Imperial based urban or a wealthier overhive setting, or even part of a setting for a cosmic heroic battle.
Prints as three main parts, plus the optional signage which comes in both English and ‚Alien‘ typefaces. Features a removable roof and door allowing access to the interior.
Ladder access to the roof allows your units to gain height advantage.
Great in combination with other MidRim City buildings in the range such as the Medium House D and the Small House A, and the Small Apartment Block, and the MidRim Shop A.

Dimensions:

Lower – 149mm x 93mm x 63mm
Roof – 149mm x 78mm x 10mm
Signage – 12mm x 114mm x 5mm

CorvusGamesTerrain3DprintableMidRimCityshopforStarWarsLegion Infinity Warpath MarvelCrisisProtocol X1400 CorvusGamesTerrain3DprintableMidRimCityshopforStarWarsLegion Infinity Warpath MarvelCrisisProtocolcosmicprintableterrain X1400 CorvusGamesTerrain3DprintableMidRimCityshopforStarWarsLegion Infinity Warpath MarvelCrisisProtocolcosmicterrain X1400 CorvusGamesTerrain3DprintableMidRimCityshopforStarWarsLegion Infinity Warpath MarvelCrisisProtocolcosmicprintableterraincyberpunk X1400

MidRim City Shop Type ‚A‘ Digital STL 3D Printable – 5,50 EUR

This 3D printable MidRim Shop is perfect for your sci-fi wargaming tables. Scaled for 28mm – 34mm games to be compatible with Star Wars Legion, Necromunda, Infinity, Warpath and Marvel Crisis Protocol.

Ideal for creating an Imperial based urban or a wealthier overhive setting, or even part of a setting for a cosmic heroic battle.
Prints as three main parts, plus the optional arch entrance which has ladder access to the upper floor. Removable doors and roof/upper floor allows access to the interiors. Upper floor overhanging balcony is a perfect spot to place your snipers.
Great in combination with other MidRim City buildings in the range such as the Medium House D and the Small House A, and the Small Apartment Block.

The arch section has multiple print options, with a split version available to print without supports.

Dimensions:

Lower – 179mm x 138mm x 73mm
Upper – 193mm x 165mm x 73mm
Roof – 79mm x 156mm x 23mm
Arch – 52mm x 69mm x 75mm

Link: Corvus Games Terrain

BK-Herr Kemper

Mostly Harmless. Im Hobby seit den 80ern..... Spielt: Infinity (Nomads & Aleph), Warmachine (Khador & Mercs), BattleTech (Alpha Strike), 7TV Adventures, In Her Majesty's Name, Dust, Batman TMG

Ähnliche Artikel
  • 3D-Druck
  • Kickstarter

AntiMatter Games: Rogues Gallery Kickstarter

09.08.2020
  • 3D-Druck
  • Kickstarter

Star Scrappers: Battledrill STL Kickstarter

07.08.20203
  • 3D-Druck
  • Science-Fiction

Bob Naismith: September Preview

06.08.20204

Kommentare

  • Ich hätte da eine Frage:
    Der „Protectorate Outpost Compound“ wire mit dem Maßstab 15mm angegeben, grundsätzlich sollte es doch problemlos möglich sein, die in 28mm auszudrucken, oder?
    Zumindest bei den STLs von LV427 war es kein Problem, den Maßstab zu verändern. Oder ist das Herstellerabhängig?

    • Nein, Du kannst im Slicer die Maße verändern wie du lustig bist. Grundsätzlich ist es nur so, dass bei Sachen, die für einen anderen Maßstab gemacht sind dir Details am Ende evtl. nicht mehr stimmen. Habe letztens einen Panzer von 1/100 auf 1/48 aufgeblasen. Hat wunderbar funktioniert, aber jetzt hat der keine Nieten mehr, sondern Warzen.

      • Danke für die Infos… vielleicht probiere ich es mal… ist ja nicht viel verloren, wenn es nicht funktionert…

  • Technisch ist das kein Problem, die Frage ist halt dann passt es noch in den Drucker, die meisten können als Grundfläche nicht mehr als 200mmx200mm. Und es dürfte etwas detailarmer aussehen als vll in 28mm Maßstab midelliert.

Schreibe einen Kommentar

Deine E-Mail-Adresse wird nicht veröffentlicht. Erforderliche Felder sind mit * markiert.

I accept that my given data and my IP address is sent to a server in the USA only for the purpose of spam prevention through the Akismet program.More information on Akismet and GDPR.