von BK-Nils | 03.05.2022 | eingestellt unter: 3D-Druck

Popov Laboratory: Aschewüsten Siedlung

Um für die neue Kampagne in den Aschewüsten bestens gerüstet zu sein, gibt es von Popov Laboratory neue Hexfeld-Module für eine 3D-Karte aus dem 3D Drucker.

Popov Laboratory Ash Waste Settlement 1 Popov Laboratory Ash Waste Settlement 2 Popov Laboratory Ash Waste Settlement 3

heard something official was coming around the Ash Wastes … arousing desire if not rage about insane amount of Creds…
I felt some of you would need something more to represent their new kit on the map : First of its range on Patreon : „Ash Wastes Settlement Tile“!
If any interest into Exclusives >
Quelle: Popov Laboratory auf Facebook
BK-Nils

Nils, Redakteur bei Brückenkopf-Online. Seit 2001 im Hobby, erstes Tabletop: DSA Armalion. Aktueller Fokus liegt auf Skirmish-Systemen und Warhammer 40.000. mehr auf https://www.instagram.com/nerdydutchman/

Ähnliche Artikel
  • 3D-Druck
  • Kickstarter
  • Science-Fiction

2nd Dynastie: Starship VI

29.03.20244
  • 3D-Druck

Loot Studios: März Bundles

29.03.20241
  • 3D-Druck
  • Science-Fiction

Wargames Exclusive: Ostermodell

28.03.20242

Kommentare

  • Das ist erstmal eine generische Siedlung in einer generischen Wüste.

    GW hat nicht die Lizenz für alles, nur weil sie groß und bekannt sind.

    Es gab auch bevor GW das neue Set herausgebracht hat ähnliche Modelle von anderen Herstellern.

  • Nun, dass das hier eine Reaktion auf das jüngst von GW veröffentliche Aschewüsten-Gelände ist, dürfte klar sein. Das sagt der Ersteller ja sogar selber.

    Aber natürlich hat GW kein Patent auf Containerbehausungen auf Stelzen. Nehmen wir es eben als gute Alternative – und ausdrucken müsste man es ja eh noch.

  • Das Ding ist 2×2 Zoll oder so groß, btw. dafür designt in der Grö0e gedruckt zu werden.

    Wenn das auf irgendwelche Füße tritt, dann auf die Füße des Kickstarters von vor nem halben Jahr, mit einer modularen 3D-Hexfeldmap von Underhives….

Die Kommentarfunktion ist geschlossen.