Blotz: Neuheiten

Blotz haben ihren Sci-Fi-Dungeon um weitere Elemente bereichert.

Wall (240mm) #1 – Girders – 8,00 GBP

A 240mm long section of wall with a girder design on both sides.
Suitable for use in numerous Sci-Fi games such as Necromunda, Judge Dredd and Infinity.
These walls are compatible with the Necromunda: Underhive board sections produced by Games Workshop.

We have created a page which details the walls used by each scenario and individual tile.

The wall is 240mm long with lugs which extend out from each end allowing it to connect with our column pieces.
Two flat ends is also supplied with this kit which can replace the lugs if desired.

Each section is 60mm high and 33mm wide
(dimensions are approximate).

Supplied unpainted.
Requires assembly.
Manufactured by Blotz.
Precision cut from 2mm MDF.

Door (95mm) #1 – 5,00 GBP

A 95mm long section of wall with a lift out door in it.
Suitable for use in numerous Sci-Fi games such as Necromunda, Judge Dredd and Infinity.
These walls are compatible with the Necromunda: Underhive board sections produced by Games Workshop.

We have created a page which details the walls used by each scenario and individual tile.

The wall is 95mm long with lugs which extend out from each end allowing it to connect with our column pieces.
One flat end is also supplied with this kit which can replace the lugs if desired.

Each section is 60mm high and 33mm wide
(dimensions are approximate).

Supplied unpainted.
Requires assembly.
Manufactured by Blotz.

Trash Compactor (28mm) – 6,50 GBP

A 28mm scale floor level trash compactor.
Suitable for use with games such as 40K, Infinity, Dredd, Warmachine, Necromunda, etc.

Length: 142mm
Width: 142mm
Height: 8mm
(Measurements are Approximate)

Precision cut from 2mm MDF.

Quelle: Blotz