von BK-Bob | 13.10.2019 | eingestellt unter: Pulp, Science-Fiction

Anvil Industry: Neuheiten

Bei Anvil Industry wandeln die Toten durch den Webstore und es gibt auch einige neue Waffen für ihre Gaslands Range.

Anvil Industry Skeleton Commissar 1 Anvil Industry Skeleton Commissar 2 Anvil Industry Skeleton Commissar 3 Anvil Industry Skeleton Commissar 4 Anvil Industry Skeleton Commissar 5 Anvil Industry Skeleton Commissar 6

Skeleton Commissar – 13,67€

The Skeleton Commissar is a highly detailed 28mm heroic scale resin miniature. The set includes:

  • Skeleton Commissar body.
  • Skeleton Commissar head
  • Flaming Skull head
  • Ritual Book right hand
  • Devil Horns right hand
  • Chain Sickle left hand
  • Guitar left hand

Anvil Industry Skull Heads 1 Anvil Industry Skull Heads 2 Anvil Industry Skull Heads 3 Anvil Industry Skull Heads 4

Skull Heads (Regiments) (7) – 3,42€

The set contains 7 different sculpts, all of which are compatible with our Regiments range and similar 28mm heroic scale miniatures. They can also be used as base decoration if you remove the neck joint.

Miniatures shown are for scale, and are not included.

Anvil Industry Stahlhelm Skulls 1 Anvil Industry Stahlhelm Skulls 2 Anvil Industry Stahlhelm Skulls 3 Anvil Industry Stahlhelm Skulls 4

Stahlhelm Skulls (7) – 3,42€

The set contains 7 different sculpts, all of which are compatible with our Regiments range and similar 28mm heroic scale miniatures. They can also be used as base decoration if you remove the neck joint.

Miniatures shown are for scale, and are not included.

Anvil Industry Empty Hoods 1 Anvil Industry Empty Hoods 2 Anvil Industry Empty Hoods 3 Anvil Industry Empty Hoods 4

Empty Hoods (7) – 3,42€

The set contains 7 different Empty Hoods, all of which are compatible with our Regiments range and similar 28mm heroic scale miniatures.

Miniatures shown are for scale, and are not included.

Anvil Industry Skeleton Hands 1 Anvil Industry Skeleton Hands 2 Anvil Industry Skeleton Hands 3 Anvil Industry Skeleton Hands 4 Anvil Industry Skeleton Hands 5

Skeleton Hands (14) – 1,71€

The set contains 14 Skeleton Hands:

  • 5 pairs right-handed rifle hands
  • 1 pair left-handed rifle hands
  • 1 pointing hand (left)
  • 1 fist (right)

These handy parts are intended for conversions, so you can give your models skeleton hands holding Anvil Regiments weapons.

Miniatures shown are conversion examples, and are not included.

Anvil Industry Skeleton Basing Kit 1 Anvil Industry Skeleton Basing Kit 2 Anvil Industry Skeleton Basing Kit 3 Anvil Industry Skeleton Basing Kit 4

Skeleton Basing Kit (5) – 3,42€

The set contains 5 skeleton basing pieces.  Great for decorating bases or dioramas.

The skeleton basing pieces are each approximately 11-18mm x 6-9mm x 5-8mm.

Miniatures and bases shown are for scale, and are not included.

Anvil Industry Tombstones 1 Anvil Industry Tombstones 2 Anvil Industry Tombstones 3 Anvil Industry Tombstones 4

Tombstones (10) – 5,13€

The set contains 10 Tombstones.  Great for decorating bases or dioramas.

The Tombstones are each approximately 16mm x 10mm x 6mm.

Miniatures and bases shown are for scale, and are not included.

Anvil Industry Tracer Rocket Pod 1 Anvil Industry Tracer Rocket Pod 2

Tracer Rocket Pod – 1,42€

This component is the Rocket Pod from the Unity Council Tracer Support Exo-Mech, suitable for mounting on vehicles or shoulder mounting on heroic scale miniatures.

Dimensions:

  • Length – 12mm
  • Width – 5mm
  • Height – 5mm

Anvil Industry Tracer Smart Grenade Launcher 1 Anvil Industry Tracer Smart Grenade Launcher 2

Tracer Smart Grenade Launcher – 1,42€

This component is the Smart Grenade Launcher from the Unity Council Tracer Support Exo-Mech. This weapon is suitable for mounting on vehicles, shoulder mounting on large miniatures, or with a bit of conversion work, could be hand held.

Dimensions:

  • Length – 21mm
  • Width – 5mm
  • Height – 6mm

Anvil Industry Goliath Ironstorm Launcher 1 Anvil Industry Goliath Ironstorm Launcher 2

Goliath Ironstorm Launcher – 2,28€

This component is the Ironstorm Launcher from the Republic Goliath, suitable for mounting on vehicles and large miniatures.

Dimensions:

  • Length – 17mm
  • Width – 14mm
  • Mount hole diameter – 3mm

Anvil Industry Goliath Minigun (left Side) 1 Anvil Industry Goliath Minigun (left Side) 2

Goliath Minigun (left side) – 2,28€

This component is the Minigun from the Republic Goliath, suitable for mounting on vehicles and large miniatures.

It is designed for left side mounting with the sight on top and the ammo drum below, but could also be mounted as a right side weapon the other way up.

Dimensions:

  • Length – 26mm
  • Width – 8mm
  • Mount hole diameter – 3mm

Anvil Industry Missile Rack (shoulder Mounted) 1 Anvil Industry Missile Rack (shoulder Mounted) 2

Missile Rack (shoulder mounted) – 1,42€

Shoulder Mounted Missile Rack from our Republic Raider Exo-Mech set.

The part is suitable for mounting on vehicles or shoulder mounting on a range of heroic scale Sci-Fi miniatures.

Dimensions:

  • Length: 15mm
  • Width: 7mm
  • Height: 8mm

Quelle: Anvil Industry

BK-Bob

Seit 2010 im Hobby. Aktuelle Projekte: Herr der Ringe (Harad, Khand und Ostlinge), Saga Ära der Magie (Die Untoten Legionen), WarmaHordes (Crucible Guard, Söldner und Circle), Summoners (Erde), Konflikt 47 (Briten)

Ähnliche Artikel
  • Allgemeines
  • Dystopian Wars

Dystopian Wars: April Neuheiten

27.03.20242
  • Marvel

Marvel: Crisis Protocol: Gwenom & Scarlet Spider

27.03.20243
  • Fantasy
  • Pulp

Lucid Eye: Pterodactyl

25.03.2024

Kommentare

  • Ich mag die Sachen von Anvil Industry unheimlich und derene Qualität ist auch immer hervorragend. Ihr Resin ist für mich eines der besten auf dem Markt.
    Bin schon extrem gespannt auf die neuen Black Ops.

  • Die Kapuzen finde ich genial. Da könnte man auch cool ne Kultistenbande für Frostgrave oder SoBaH draus machen.

  • Jedesmal einen Kauf wert.
    Bestellung ist schon draußen.
    Haben bisher immer eine Top Qualität geliefert.

Die Kommentarfunktion ist geschlossen.